SuperNine D38999 Series I Type Connectors and Cables

SuperNine D38999 Series I Type Connectors and Cables

The Advanced-Performance MIL-DTL-38999 Series I Type Bayonet-Lock Connector

SuperNine® is a "Better-than-QPL" MIL-DTL-38999 signature series offering available only from Glenair. Series I scoop-proof bayonet-lock connectors deliver outstanding vibration and shock performance and fast mating / demating.

  • Scoop-proof design prevents pin damage and short circuits
  • Improved, positive-lock, 3-point stainless-steel pin bayonet coupling for outstanding shock and vibration resistance
  • Fully tooled for all MIL-STD-1560 insert arrangements
  • Contact options include size #22D, #20, #16, and #12 (see High-Speed series for Size #8)
  • 500 + mating cycles exceeds MIL-DTL-38999 specification
  • Glenair signature Tin-Zinc finish is RoHS compliant and cadmium compatible

Reference

Related Catalogs

SuperNine D38999 Series I Type Connectors and Cables

SuperNine D38999 Series I Type Connectors and Cables

The Advanced-Performance MIL-DTL-38999 Series I Type Bayonet-Lock Connector

  • eBook
  • PDF (Single pages, print friendly)

On this page...

Environmental Connectors

  • SuperNine MIL-DTL-38999 Series I

Reference

Plug and Receptacle Connectors with Integral Banding Porch, 231-206

231-206
Plug and Receptacle Connectors with Integral Banding Porch

Wall-Mount Receptacles, Flush Flange, 231-207

231-207
Wall-Mount Receptacles, Flush Flange

  • 231-207-07
    Jam-Nut Mount Receptacle, Flush Flange
Wall-Mount Receptacle, Stepped Contacts, 231-208

231-208
Wall-Mount Receptacle, Stepped Contacts

  • 231-208-07
    Jam-nut Mount Receptacle, Stepped Contacts
Wall-Mount Receptacle, Washout Standoffs, 231-209

231-209
Wall-Mount Receptacle, Washout Standoffs

  • 231-209-07
    Jam-Nut Mount Receptacle with Standoffs
Wall-Mount Receptacle with Standoffs, 231-210

231-210
Wall-Mount Receptacle with Standoffs

  • 231-210-07
    Jam-Nut, Standoff Standard Thread
  • 231-210-17
    Jam-Nut. Standoff Metric Thread
Dual-Flange Wall-Mount Receptacle, 231-211

231-211
Dual-Flange Wall-Mount Receptacle

  • 231-211-07
    Jam-Nut Mount Dual Flange Receptacle
Wall-Mount Feedthru Receptacle Connector, 231-212

231-212
Wall-Mount Feedthru Receptacle Connector

Plug-to-Receptacle Interface, 231-213

231-213
Plug-to-Receptacle Interface

  • Sav-Con® Connector Saver
Plug-to-Plug Interface, 231-214

231-214
Plug-to-Plug Interface

  • Sav-Con® Connector Saver
Shorting Connectors, Plug and Receptacle, 250-101

250-101
Shorting Connectors, Plug and Receptacle

  • G6
    Plug Connector
  • D0
    Wall-mount Thru Hole
  • 07
    Receptacle, Jam-nut

High-Speed Connectors

  • SuperNine MIL-DTL-38999 Series I

Reference

Connector with Crimp-Removable, Size 8 RF and High-Speed Contact Options, 231-217

231-217
Connector with Crimp-Removable, Size 8 RF and High-Speed Contact Options

High-Speed Wall-Mount Receptacle with Standoffs, 231-218

231-218
High-Speed Wall-Mount Receptacle with Standoffs

  • 231-218-07
    High-Speed Jam-Nut Mount Receptacle with Standoffs
High-Speed Wall-Mount Dual Flange Receptacle, 231-225

231-225
High-Speed Wall-Mount Dual Flange Receptacle

  • 231-225-07
    High-speed jam-nut mount dual flange receptacle

Hermetic Connectors

  • SuperNine MIL-DTL-38999 Series I

Reference

Wall-Mount Hermetic Receptacle, 231-100-H0 and MS27469

231-100-H0
MS27469
Wall-Mount Hermetic Receptacle

Solder-Mount Hermetic Receptacle, 231-100-H5 and MS27471

231-100-H5
MS27471
Solder-Mount Hermetic Receptacle

Jam-Nut Mount Receptacle, 231-100-H7 and MS27470

231-100-H7
MS27470
Jam-Nut Mount Receptacle

Wall-Mount Hermetic Receptacle, 231-100-H0

231-100-H0
Wall-Mount Hermetic Receptacle

Solder-Mount Hermetic Receptacle, 231-100-H5

231-100-H5
Solder-Mount Hermetic Receptacle

Jam-Nut Mount Hermetic Receptacle, 231-100-H7

231-100-H7
Jam-Nut Mount Hermetic Receptacle

Connector with Crimp-Removable Socket Contacts, 231-106

231-106
Connector with Crimp-Removable Socket Contacts

  • 231-106-H0
    Wall-Mount
  • 231-106-H5
    Solder-Mount
  • 231-106-H7
    Jam-Nut Mount
Code Red Lightweight Hermetic Receptacle, 231-250

231-250
Code Red Lightweight Hermetic Receptacle

  • 231-250-D0
    Wall-Mount Front Panel Receptacle with Standard Holes
  • 231-250-E0
    Wall-Mount Back Panel Receptacle with Standard Holes
  • 231-250-07
    Jam-Nut Mount Receptacle

Filter Connectors

  • SuperNine MIL-DTL-38999 Series I

Reference

Filter Connector Wall-Mount Receptacle, 240-381W

240-381W
Filter Connector Wall-Mount Receptacle

Connector Wall-Mount Receptacle with Crimp-Removable Contacts, 240-381R

240-381R
Connector Wall-Mount Receptacle with Crimp-Removable Contacts

Connector Jam-Nut Receptacle, 240-381J

240-381J
Connector Jam-Nut Receptacle

Connector Jam-Nut Receptacle with Crimp-Removable Contacts, 240-381S

240-381S
Connector Jam-Nut Receptacle with Crimp-Removable Contacts

Connector Adapter, 240-381A

240-381A
Connector Adapter

Backshells and Accessories

  • SuperNine MIL-DTL-38999 Series I

Reference

Shrink Boot Adapter, Composite, 310F*045

310F*045
Shrink Boot Adapter, Composite

  • 310FS045 S
    Straight
  • 310FT045 H
    45°
  • 310FW045 J
    90°
Shrink Boot Adapter, Pre-Installed Boot, Composite, 310F*048

310F*048
Shrink Boot Adapter, Pre-Installed Boot, Composite

  • 310FS048
Backshell, Environmental, Spin Coupling, 370F*001

370F*001
Backshell, Environmental, Spin Coupling

  • 370FS001 S
    Straight
  • 370FA001 A
    90° Elbow
  • 370FB001 B
    45° Elbow
  • 370FH001 H
    45° Cut/Weld
  • 370FJ001 J
    90° Cut/Weld
  • 370FM001 M
    45° Full Radius
  • 370FN001 N
    90° Full Radius
Composite, Shrink Boot, Ultra Low Profile 90°, 440F*143

440F*143
Composite, Shrink Boot, Ultra Low Profile 90°

  • 44FW143 E
    90° Split
  • 440FW143 W
    90° Solid
Composite, Shrink Boot, Micro Band, 447F*326

447F*326
Composite, Shrink Boot, Micro Band

  • 44FW143 S
    Straight
  • 447FT326 T
    45°
  • 447FW326 W
    90°
Swing-Arm® Saddle Clamp, 870F001

870F001
Swing-Arm® Saddle Clamp

Swing-Arm® Saddle Clamp, Braid Sock, Composite, 870F002

870F002
Swing-Arm® Saddle Clamp, Braid Sock, Composite

Swing-Arm® Saddle Clamp, EMI Banding Adapter, Aluminum/SST, 870F005

870F005
Swing-Arm® Saddle Clamp, EMI Banding Adapter, Aluminum/SST

Swing-Arm® Clamp, EMI Banding Adapter, Composite, 871F004

871F004
Swing-Arm® Clamp, EMI Banding Adapter, Composite

ProSeal™ Spring-Action Receptacle Cover, 667-467

667-467
ProSeal™ Spring-Action Receptacle Cover

Plug Protective Cover, 660-012

660-012
Plug Protective Cover

Receptacle Cover, Spring-Loaded EMI, 661-002

661-002
Receptacle Cover, Spring-Loaded EMI

Nut Plate, M85049

M85049
Nut Plate

M85049 nut plates fit MIL-DTL-38999 Series I, III, and IV connector receptacles with square flanges.

Nut plates eliminate loose lockwashers and nuts for faster installation time and prevention of dropped hardware in hard-to-reach areas. Two finishes are available: chem film or epoxy primer. Passivated stainless steel clinch nuts, 6061 aluminum alloy plate.

For MIL-DTL-38999 Series I, III, and IV Connectors:

  • Full Perimeter Nut Plates
  • 3/4 Perimeter Nut Plates
  • 1/4 Perimeter Nut Plates
Composite Swing-Arm® Strain Relief Assembly Procedure

Composite Swing-Arm® Strain Relief Assembly Procedure

Glenair Assembly Procedure (GAP-029) for Fast and Trouble-Free Termination of EMI Shielding

StarShield™ EMI/RFI Shield Termination Backshell, 470-013

470-013
StarShield™ EMI/RFI Shield Termination Backshell

  • 470FS103
Lipped, Straight Shrink Boots, without Eyelet, 770-003S

770-003S
Lipped, Straight Shrink Boots, without Eyelet

Lipped, straight shrink boots, no eyelet, provide mechanical and environmental protection from damage and debris.

Lipped, Straight Shrink Boot, With Eyelet, 770-001S

770-001S
Lipped, Straight Shrink Boot, With Eyelet

Lipped, straight shrink boots, with eyelet, provide mechanical and environmental protection from damage and debris.

Lipped, Short Straight Shrink Boot, Without Eyelet, 770-004S

770-004S
Lipped, Short Straight Shrink Boot, Without Eyelet

Lipped, short, straight shrink boots, no eyelet, provide mechanical and environmental protection from damage and debris.

Autoshrink D Cold-Action Boots, Standard / Short, 770-005 and 770-006

770-005
770-006
Autoshrink D Cold-Action Boots, Standard / Short

Cold-action Autoshrink D shrink boots, no eyelet, provide mechanical and environmental protection from damage and debris.

  • 770-005
    Lipped boot, no eyelet, Autoshrink™ D
  • 770-006
    Short lipped boot, no eyelet, Autoshrink™ D
Autoshrink D Cold-Action Boot, Lipless, No Eyelet, 770-015

770-015
Autoshrink D Cold-Action Boot, Lipless, No Eyelet

Cold-action Autoshrink D shrink boots, no eyelet, provide mechanical and environmental protection from damage and debris.

  • S = Straight
  • A = 90°
Jam Nut Wrench for Connectors, 600-117

600-117
Jam Nut Wrench for Connectors

Contacts and Tools

  • SuperNine MIL-DTL-38999 Series I

Reference

Contacts - M39029 and Glenair Signature Solutions

Contacts
M39029 and Glenair Signature Solutions

SuperNine MIL-DTL-38999 Series I Type

  • D38999 QPL Crimp Contacts and Commercial Crimp Contacts
  • Extended Durability D38999 QPL and Commercial Equivalent Crimp Contacts
  • Size #8 High Power Contacts
  • Size #16 Coaxial Contacts
  • Size #12 Coaxial Contacts
  • Size #12 75 Ohm Matched Impedance Coaxial Contacts
  • Size #8 2.5 GHz Max Operating Frequency, 50 Ohm Contacts for Low Loss Coax Cable
  • Size #8 3 GHz Max Operating Frequency, 50 Ohm Contacts for Coax Cable
  • Size #8 4 GHz Max Frequency, 75 Ohm Low-Loss, Matched-Impedance Coax Contacts & Cable
  • Size #8 Coaxial Contacts
  • Size #8 Concentric Twinax Contacts
  • Size #8 Quadrax Contacts
  • Thermocouple Contacts
  • Size #12 Pneumatic Contacts
  • Size #8 Cavity Optoelectronic Contact
El Ochito® Octaxial "White," "Blue," and "Red" Contacts and Assembly Tools

El Ochito® Octaxial "White," "Blue," and "Red" Contacts and Assembly Tools

SuperNine MIL-DTL-38999 Series I Type

  • Ochito "White"
    1000BASE-T/10GBASE-T

    El Ochito® "White" octaxial contacts provide 10 Gigabit Ethernet in the same size as 100BASE-T Quadrax contact.
  • Ochito "Blue"
    SuperSpeed USB

    Low-dielectric material. Up to 5 Gbps. 90 ohms. El Ochito® "Blue" octaxial contacts provide an aerospace-grade solution for SuperSpeed USB.
  • Ochito "Red"
    HDMI, Displayport, SATA

    Low-dielectric material. Up to 5 Gbps. 100 ohms. El Ochito® "Red" octaxial contacts provide an aerospace-grade solution for multi-gigabit data rates.
El Ochito® Contact Termination/Installation Kit, 600-280

600-280
El Ochito® Contact Termination/Installation Kit

SuperNine MIL-DTL-38999 Series I Type

600-280 Tool Kit combines all the tools necessary to terminate El Ochito red, blue, and white contacts. Great for customers looking to terminate el Ochito® contacts to cables. Unit includes portable protective case with cutout foam for ease of transportation. Order by kit level for simplified ordering. Customize tool kit contents to meet your specific requirements. Additional foam cutout cavities allow for easy to upgrade your kit as you increase your el Ochito tool collection.

For full-range of El Ochito Contact Termination/Installation Kit options for other Glenair connector series (ARINC, 792, 28, 801, 805, 806, and 816), please see:

Crimp Tools & Positioners

Crimp Tools & Positioners

SuperNine MIL-DTL-38999 Series I Type

  • Miniature Adjustable Crimp Tools
    809-015 (M22520/2-01) Standard Crimper
  • Crimp Tool and Positioner for #16 Coaxial Outer Contact
  • Crimp Tool and Positioner for #12, #16, and #20 Power Contacts, Crimp Adapters
  • Parallel Action Crimp Tool and Hex Die Set for #12 and #8 Coax Contacts
  • Crimp Tool and Positioner for #8 Octaxial El Ochito Cable Shield Crimp
Insertion and Extraction Tools and Retention Tester

Contact Insertion and Extraction Tools

SuperNine MIL-DTL-38999 Series I Type

  • Contact Insertion and Extraction Tools
  • Contact Retention Tester for SuperNine Contacts
Dummy Contact Sealing Plugs (DCSP)

Dummy Contact Sealing Plugs (DCSP)

SuperNine MIL-DTL-38999 Series I Type

For reliable sealing of unused contact cavities — without the use of electrical contacts

  • Powerful tool in Electrical Wire Interconnect System weight reduction
  • Eliminates use of expensive electrical contacts for sealing-only applications
  • Leverages connector contact clip for secure retention of the sealing plug—no possibility of FOD
  • Easy-to-install single piece design
  • Visible quality control / confirmation of cavity fill from back of connector
  • EWIS compliant test report available, ref. GT 15-106
  • 680-116
    Dummy Contact Sealing Plug for D38999
Size 8 Plastic Sealing Plug for D38999, 859-106

859-106
Size 8 Plastic Sealing Plug for D38999

SuperNine MIL-DTL-38999 Series I Type

Plastic sealing plugs are for use in MIL-DTL-38999 Series III arrangements with size 8 catvities. Optional grommet follower is designed to fit Glenair connector grommet.

Band-Master ATS® Banding Tool

Band-Master ATS® Banding Tool

SuperNine MIL-DTL-38999 Series I Type

  • 601-100
    Standard Band-Master ATS® Tool
  • 601-005
    Short Flat
  • 601-006
    Short Precoiled
  • 601-040
    Medium Flat
  • 601-041
    Medium Precoiled
  • 601-049
    Long Flat
  • 601-050
    Long Precoiled
Connector Holding Tool, Plug and Receptacle, 600H005

600H005
Connector Holding Tool, Plug and Receptacle

SuperNine MIL-DTL-38999 Series I Type

  • P
    Plug Holder
  • R
    Receptacle Holder
O-Ring for Jam Nut Receptacle Connectors, 239-205

239-205
O-Ring for Jam Nut Receptacle Connectors

SuperNine MIL-DTL-38999 Series I Type