Qualified Components IAW Handbook of Shipboard Electromagnetic Shielding Practices (S9407-AB-HBK-010). Submarine and Below-Deck.
Glenair is one of the only suppliers of EMC wire protection conduit systems built in accordance with S9407-AB-HBK-010. These ruggedized interconnect fittings, connector adapters, and feed-thrus are utilized in the installation of electrical cables, cableways, and shielding associated with electrical and electronic systems installed aboard submarines, in below-deck areas of surface ships, and in many shore-based installations. The flexible metal-core conduit combined with brazeon and user-installable fittings enhance electromagnetic compatibility (EMC) of shipboard wiring systems. Electromagnetic Compatibility (EMC) is a major consideration during ship design and equipment installation because without EMC the warfare capacity of Navy ships is seriously reduced.
- US Navy-qualified conduit fittings and flexible metalcore conduit
- GR2000 braze-on type feed-thrus, transitions, and bulkhead penetrators
- RP2000 conduit fittings and adapters designed for on-site termination and assembly
- Qualified grounding clamps and ground straps IAW M24749
This catalog is intended for use by ship designers, work planners, and personnel engaged in the installation of electrical and electronic cables and equipment for new ship construction, SHIPALT installation and repair at shipyards, tenders and other activities.
Navy Qualification Letters
Shielding Effectiveness Tables
 |
- eBook
- PDF (Two-page spreads)
- PDF (Single pages, print friendly)
|
On this page...
GR2000
 |
Transition Fitting for MIL-DTL-5015 Connectors IAW S9407-AB-HBK-010 REV 2, GR2120
|
 |
Enclosure Fitting for MIL-DTL-5015 Connectors IAW S9407-AB-HBK-010 REV 2, GR2121
|
 |
90° Elbow, Non-Environmental for MIL-DTL-5015 Connectors IAW S9407-AB-HBK-010 REV 2, GR2122
|
 |
Transition Fitting for Bulkhead Stuffing Tube IAW S9407-AB-HBK-010 REV 2, GR2123
|
 |
Transition Fitting for MS Series Backshell IAW S9407-AB-HBK-010 REV 2, GR2124
|
 |
Transition Fitting for Triaxial Connector IAW S9407-AB-HBK-010 REV 2, GR2125
|
 |
End Fitting for Flexible Conduit IAW S9407-AB-HBK-010 REV 2, GR2126
|
 |
Conduit Coupling IAW S9407-AB-HBK-010 REV 2, GR2127
|
 |
Panel Fitting for Flexible Conduit IAW S9407-AB-HBK-010 REV 2, GR2128
|
 |
Ferrule and Coupling Nut for Flexible Conduit IAW S9407-AB-HBK-010 REV 2, GR2129
|
 |
|
RP2000
 |
Straight Conduit End Fitting IAW S9407-AB-HBK-010 REV 2, RP2100
|
 |
90° Conduit End Fitting IAW S9407-AB-HBK-010 REV 2, RP2110
|
 |
90° Conduit End Fitting IAW S9407-AB-HBK-010 REV 2, RP2120
|
 |
Conduit End Fitting IAW S9407-AB-HBK-010 REV 2, RP2130
|
 |
Conduit to Pipe Thread Tapered End Fitting IAW S9407-AB-HBK-010 REV 2, RP2140
|
 |
Conduit End Fitting IAW S9407-AB-HBK-010 REV 2, RP2141
|
 |
Conduit-to-Conduit Coupling IAW S9407-AB-HBK-010 REV 2, RP2200
|
 |
Conduit-to-Pipe Coupling IAW S9407-AB-HBK-010 REV 2, RP2210
|
 |
Adapter to M5015 Connector IAW S9407-AB-HBK-010 REV 2, RP2311
|
 |
Adapter to Triaxial Connector IAW S9407-AB-HBK-010 REV 2, RP2321
|
 |
Adapter to Coaxial Connector IAW S9407-AB-HBK-010 REV 2, RP2330
|
 |
Adapter to M26482 Connector IAW S9407-AB-HBK-010 REV 2, RP2340
|
 |
Adapter to MS3155 Connector IAW S9407-AB-HBK-010 REV 2, RP2350
|
 |
Adapter to M28840 Backshell IAW S9407-AB-HBK-010 REV 2, RP2360
|
 |
Adapter to M24235 Stuffing Tube IAW S9407-AB-HBK-010 REV 2, RP2400
|
 |
General-use Adapter IAW S9407-AB-HBK-010 REV 2, RP2411
|
 |
Adapter to M24321 Hull Fitting IAW S9407-AB-HBK-010 REV 2, RP2420
|
 |
Tapered Pipe Thread Adapter IAW S9407-AB-HBK-010 REV 2, RP2430
|
 |
Straight Pipe Thread Adapter IAW S9407-AB-HBK-010 REV 2, RP2431
|
 |
Non-Metallic (Nylon) Adapter IAW S9407-AB-HBK-010 REV 2, RP2440
|
 |
Panel Termination Adapter IAW S9407-AB-HBK-010 REV 2, RP2500
|
 |
90° Adapter IAW S9407-AB-HBK-010 REV 2, RP2610
|
 |
45° Adapter IAW S9407-AB-HBK-010 REV 2, RP2620
|
Metal-Core Conduit
 |
Nickel-Iron Conduit with EMI/RFI Braided Shield IAW S9407-AB-HBK-010, TYPE 1
|
 |
Nickel-Iron Conduit with EMI/RFI Braided Shield and Environmental Jacket IAW S9407-AB-HBK-010, TYPE 2
|
Grounding Clamps and Straps
 |
Grounding Clamp for Flexible Metal-Core Conduit
|
 |
Mil-Qualified for Shipboard Applications
|
Wire Protection
 |
- Straight, 45° and 90° angle-lipped shrink boots and shrink tubing
- Fast and easy installation
- Four high-performance material types
- Fire-resistance in all material types
- Reliable IP68 sealing
- 3000 VAC rated
- Multiple color options
- Service temperature range: -65°C to 300°C
- Ideal for repair of cables and conduit with Duralectric jacketing
- Extreme UV / sunlight resistance
- Integrated ground strap versions available
|
 |
Durable, lightweight corrosion-free EMI/RFI shielded composite junction boxes NAVSEA standard drawing 803-6983506 Rev. B
- Over a dozen different tooled sizes and shapes
- Extremely durable, corrosion-free, high temperature engineering composite thermoplastic
- Tested and qualified to U.S. Navy, UK MOD and hundreds of commercial aircraft and marine applications
|
 |
- Easy repositioning from straight, 45° and 90° cable-exit orientations
- Submersible performance without the need for shrink boots
- Durable, flexible EMI/RFI and environmentally sealed core with locking-pivot Swing-Arm™ frame
- Accommodates power, signal and fiber optic jacketed cables
- Reposition terminated cables with no impact on signal integrity or system performance
- Easy repeatable assembly process using standard tools
|
US Navy Qualified Helical Metal-Core Conduit for Above and Below-Deck Shipboard Wire Routing Applications
Improved sealing and shielding: the ultimate in highly flexible, crush-proof EMI/EMP wire protection. US Navy Qualified Brass, CRES, and Nickel-Iron, with
Glenair Signature "BlueJacket" jacketing. Do it once, do it right with Glenair Signature MIL-PRF-24758A wire protection conduit systems.
 |
- 630-101
Metal Piggyback Boot Feed-Thru
- 630-103
Composite Piggyback Boot Feed-Thru
- 310-057
Composite Piggyback Boot Adapter for MIL-DTL-5015, MIL-DTL-26482, or MIL-DTL-28840 Connectors
- 319-183
Composite Piggyback Boot Adapter with Integrated Shield Sock for MIL-DTL-5015, MIL-DTL-26482, or MIL-DTL-28840 Connectors
- 443-033
Composite Piggyback Boot Adapter for MIL-DTL-5015, MIL-DTL-26482, or MIL-DTL-28840 Connectors
|
 |
- 667-450
Proseal Protective Cover for MIL-DTL-5015, MS3100, and MS3400 Connectors Threaded closure seal, full environmental
- 667-451
Proseal Protective Cover for MIL-DTL-5015, MS3100, and MS3400 Connectors Pressure seal, dust and immersion resistant
- 667-472
Proseal Protective Cover for MIL-DTL-26482 Series I and II Connectors Pressure seal, dust and immersion resistant
|