Compliance

Glenair Limited Warranty

In the event this product contains a defect in the materials or workmanship, Glenair, Inc. will, at is option, either replace or repair the product if the product, separate and removed from any machinery or equipment in which it has been incorporated, is returned with proof of purchase to Glenair, Inc. by the original purchaser within twelve (12) months of date of purchase.

Glenair, Inc. makes no other warranties, either expressed or implied, with respect to the product, its quality, performance, merchantability, or fitness for any particular purpose. Glenair, Inc. assumes no responsibility for, and in no event shall it be liable for direct, indirect, special, incidental or consequential damages, including lost profits or lost savings, arising out of use of, or inability to use, the product, including any costs incurred in removing the product from any machinery or equipment in which it has been incorporated, even if Glenair, Inc. has been advised of the possibility of such damages. The remedies set forth herein are exclusive.

Limited Warranty Document

Test Reports

Compliance Documents
Document Date
Chemical Agent Testing for 12 Common Plastic Materials Used in Glenair Products January 2012
Conflict Minerals Statement
Section 1502 of the Dodd-Frank Wall Street Reform and Consumer Protection Act referring to "Conflict Minerals"
December 2014
DoD Federal Acquisition Regulation Supplement (DFARS) Restriction on Acquisition of Certain Articles Containing Specialty Metals August 2015
European Union Directive Related to Registration, Evaluation and Authorization of Chemicals (REACH) September 2016
European Union Directives relating to Restriction of use of certain Hazardous Substances (RoHS) and Waste Electrical and Electronic Equipment (WEEE) June 2016
Glenair MIL-PRF 24758 Conduit Surface Transfer Impedance Test 24 February 2006
Glenair SAE Qualified on all Three new RoHS Platings 07 May 2013
Glenair Supplier Policy
Section 1502 of the Dodd-Frank Wall Street Reform and Consumer Protection Act referring to "Conflict Minerals"
December 2014
International Traffic in Arms Regulations (ITAR) and Export Administration Regulations (EAR) July 2016
Product Obsolescene Policy January 2015
US Department of Defense and Subcontractors' Concerns About Materials Containing Certain Phthalates 24 May 2013

Nadcap CertificateNadcap Accreditation, Electronics Cable and Harness Assemblies
Document Certificate Number Date
Nadcap Certificate: Glenair Anaheim Facility 11490168990 31 July 2017 (Expiration)
Scope of Accreditation - Electronics 11490168990 17 June 2010

Terms and Conditions
Document
General Terms and Conditions of Sale
Purchase Order - General Terms & Conditions

Certificates of Registration and Approval
Document Date
ISO 9001:2008 and AS9100 Perry Johnson Registrars, Inc.
ISO 9001:2008 and AS9100 - Appendix Perry Johnson Registrars, Inc.
ISO 9001:2008 - Korea International Certification Registrar Ltd.
Certificate of Approval - Quality Management System Standards Lloyd's Register Quality Assurance Ltd.

Material Safety Data Sheets (MSDSs)
MSDS Date
Glenair 2010, 2025, 2040 & 2071 Compound (Type 1, 2, 3 & 7 materials) April 2012
Glenair Fluro Carbon 2012, 2050 & 2051 Compound (Type 4, 5 & 6 materials) April 2012
ÅngströmBond® AB9112 Resin June 2009
EPO-TEK 353ND, Part A 30 April 2009
TRA-BOND F112 Hardener 01 March 2009
ÅngströmBond® AB9112 HardenerMarch 2009
AmberStrand® Silver Clad Fiber 20 August 2008
AmberStrand® Nickel Clad Fiber 30 June 2008
3M™ Novec™ Engineered Fluid HFE-72DA 20 February 2008
Glenair 779-001 Resin 04 July 2011
Glenair 779-001 Hardener 07 February 2013
Glenair Type R Adhesive 22 October 2009
Glenair W1 Adhesive 11 December 2008
Glenair W2 Adhesive 22 October 2009
Glenair W3 Adhesive 12 January 2012
Glenair W4 Adhesive 11 February 2014

Loctite
Document Date
Loctite 1 23 May 2008
Loctite 2 23 May 2008
Loctite 3 23 May 2008
Loctite 4 23 May 2008
Loctite 5 10 January 2010
Loctite 6 10 January 2010
Loctite 7 10 January 2010
Loctite 8 10 January 2010
Loctite 9 10 January 2010

RayChem HAK-C-100
Document Date
RayChem HAK-C-100 1 of 4 MSDS October 1994
RayChem HAK-C-100 2 of 4 MSDS October 1994
RayChem HAK-C-100 3 of 4 MSDS October 1994
RayChem HAK-C-100 4 of 4 MSDS October 1994

Series 77 Heat Shrink Boot Shelf Life
Document Date
Heat Shrink Boot Shelf Life Report June 2016
Adhesive Shelf Life June 2016

Uni Rez 1
Document Date
Uni-Rez® 2651 1 28 October 2008
Uni-Rez® 2651 2 28 October 2008
Uni-Rez® 2651 3 28 October 2008

Band-Master™ ATS Testing
Document Date
Glenair Advanced Band Termination System Slim Standard Band Testing 24 October 2014
Glenair Advanced Band Termination System Nano Band Testing 17 September 2014
Glenair Band-Master ATS Micro Tool Endurance Test 23 April 2014