Series 62
General Purpose Saddle Clamps provide strain relief for jacketed cable. Saddle bars have tapped threads. Tighten saddle bars until the cable is secured.
Self-Locking Saddle Clamps are recommended for aircraft wiring harnesses with open wire bundles. Anti-decoupling mechanism provides audible detented coupling and prevents backoff under high vibration. Full radius saddle bars have self-locking SST clinch nuts. Wrap wire bundle with tape or use rubber bushing. Tighten saddle bars until fully seated on clamp frame. Full radius saddles should be fully bottomed onto frame.
EMI Braid Socks feature a length of shield braid terminated to a nickel-plated brass EMI adapter. Aluminum, stainless steel or composite. Self-locking, suitable for high vibration environments.
Reference
Circular > Saddle Clamp / Series 62
Saddle Clamps on this page for...
Series 62 Saddle Clamps for AS50151 Crimp, M26482 Series II, M83723 Series III, AS95234
 |
Spin coupling, general purpose.
620A*046 saddle clamp fits AS50151 crimp (MS3450), AS95234, MIL-DTL-26482 Series II, MIL-DTL-83723 Series III connectors. Aluminum coupling nut, frame and saddles. Stainless steel screws and washers.
For AS50151 Crimp, M26482 Series II, M83723 Series III, AS95234.
|
 |
Self-locking. Full radius saddles.
Saddle clamp fits AS50151 crimp (MS3450), AS95234, MIL-DTL-26482 Series II, MIL-DTL-83723 Series III connectors. For use with open bundle wiring harnesses and closed bundle (jacketed) harnesses. Anti-decoupling mechanism provides audible detented coupling and prevents backoff under high vibration. Die cast saddle bars have self-locking stainless steel clinch nuts. Full radius saddles are intended to be fully closed (bottomed onto frame). Wrap wire bundle with silicone tape so that the saddles, when fully closed, securely grip the wire bundle. Aluminum or 300 series stainless steel. Straight, 45° and 90° profiles.
For AS50151 Crimp, M26482 Series II, M83723 Series III, AS95234.
|
 |
Self-locking. Full radius saddles.
Composite saddle clamp fits AS50151 crimp (MS3450), AS95234, MIL-DTL-26482 Series II, MIL-DTL-83723 Series III connectors. Anti-decoupling mechanism provides audible detented coupling and prevents backoff under high vibration. Telescoping screws. Full radius saddles are intended to be bottomed onto frame. Wrap wire bundle with silicone tape so that the saddles, when fully closed, securely grip the wire
bundle. High temperature thermoplastic. Straight, 45° and 90° profiles.
For AS50151 Crimp, M26482 Series II, M83723 Series III, AS95234.
|
 |
Shielded. Self-locking. Full radius saddles.
Saddle clamp has shielding braid attached to EMI adapter. Fits AS50151 crimp (MS3450), AS95234, MIL-DTL-26482 Series II, MIL-DTL-83723 Series III connectors. Anti-decoupling mechanism in coupling nut provides audible detented coupling and prevents backoff under high vibration. Self-locking stainless steel clinch nuts. Aluminum or SST coupling nut and frame, with SST saddles. Straight, 45° and 90° profiles.
For AS50151 Crimp, M26482 Series II, M83723 Series III, AS95234.
|
 |
Shielded. Self-locking. Composite.
Saddle clamp has brass EMI adapter attached to 12 inches (30 cm) of shielding braid. Fits AS50151 crimp (MS3450), AS95234, MIL-DTL-26482 Series II, MIL-DTL-83723 Series III connectors. Anti-decoupling mechanism in coupling nut provides audible detented coupling and prevents backoff under high vibration. Captive self-locking clinch nuts, full radius saddles. Available with ArmorLite® lightweight microfilament SST braid. Straight, 45° and 90° profiles.
For AS50151 Crimp, M26482 Series II, M83723 Series III, AS95234.
|
Series 62 Saddle Clamps for AS50151 Solder Connectors
 |
- 620-053 Style A Saddle Clamp
Direct coupling. Fits AS50151 solder connectors. Style A clamp is a non-environmental light duty saddle clamp conforming to AS85041/41 and MS3057A.
- 620-053 Style C Saddle Clamp
Direct coupling. Fits AS50151 solder connectors. Style C clamp has silicone rubber cable grommet and aluminum compression sleeve. Meets AS85049/2 Category 1C water immersion requirements.
For AS50151 Solder Connectors.
|
 |
620-053 Style H Saddle Clamp
Direct coupling. Fits AS50151 solder connectors. Style H is a non-environmental heavy duty saddle clamp conforming to AS85049/42 and MS3057D. Aluminum or stainless steel.
For AS50151 Solder Connectors.
|
Series 62 Saddle Clamps for MIL-DTL-38999 Series I and II Connectors
 |
Spin coupling, general purpose. 620F*012 saddle clamp fits MIL-DTL-38999 Series I and II connectors. For use with open bundle wiring harnesses and closed bundle (jacketed) harnesses. Aluminum coupling nut and frame, 300 series stainless steel hardware.
For MIL-DTL-38999 Series I and II Connectors.
|
 |
Self-locking. Full radius saddles. Open frame saddle clamp fits MIL-DTL-38999 Series I and II connectors. For use with open bundle wiring harnesses and closed bundle (jacketed) harnesses. Anti-decoupling mechanism provides audible detented coupling and prevents backoff under high vibration. Die cast saddle bars have self-locking stainless steel clinch nuts. Full radius saddles are intended to be fully closed (bottomed onto frame). Wrap wire bundle with silicone tape so that the saddles, when fully closed, securely grip the wire bundle. Straight, 45° and 90° profiles. Aluminum or stainless steel.
For MIL-DTL-38999 Series I and II Connectors.
|
 |
Self-locking. Full radius saddles. Lightweight, corrosion-free composite saddle clamp fits MIL-DTL-38999 Series I and II connectors. For use with open bundle wiring harnesses and closed bundle (jacketed) harnesses. Anti-decoupling mechanism provides audible detented coupling and prevents backoff under high vibration. Telescoping screws. Full radius saddles are intended to be bottomed onto frame. High temperature thermoplastic. Straight, 45° and 90° profiles.
For MIL-DTL-38999 Series I and II Connectors.
|
 |
Shielded. Self-locking. Full radius saddles. Saddle clamp has shielding braid attached to EMI adapter. Fits MIL-DTL-38999 Series I and II connectors. Anti-decoupling mechanism in coupling nut provides audible detented coupling and prevents backoff under high vibration. Self-locking stainless steel clinch nuts. Aluminum or SST coupling nut and frame, with SST saddles. Straight, 45° and 90° profiles.
For MIL-DTL-38999 Series I and II Connectors.
|
 |
Shielded. Self-locking. Composite. Saddle clamp has brass EMI adapter attached to 12 inches (30 cm) of shielding braid. Fits MIL-DTL-38999 Series I and II connectors. Anti-decoupling mechanism in coupling nut provides audible detented coupling and prevents backoff under high vibration. Captive self-locking clinch nuts, full radius saddles. Available with ArmorLite®lightweight microfilament SST braid. Straight, 45° and 90° profiles.
For MIL-DTL-38999 Series I and II Connectors.
|
Series 62 Saddle Clamps for MIL-DTL-38999 Series III and IV Connectors
 |
Spin coupling, general purpose. 620H*012 saddle clamp fits MIL-DTL-38999 Series III and IV connectors. For use with open bundle wiring harnesses and closed bundle (jacketed) harnesses. Aluminum coupling nut and frame, 300 series stainless steel hardware.
For MIL-DTL-38999 Series III and IV Connectors.
|
 |
Self-locking. Full radius saddles. Open frame saddle clamp fits MIL-DTL-38999 Series III and IV connectors. For use with open bundle wiring harnesses and closed bundle (jacketed) harnesses. Anti-decoupling mechanism provides audible detented coupling and prevents backoff under high vibration. Die cast saddle bars have self-locking stainless steel clinch nuts. Full radius saddles are intended to be fully closed (bottomed onto frame). Wrap wire bundle with silicone tape so that the saddles, when fully closed, securely grip the wire bundle. Straight, 45° and 90° profiles. Aluminum or stainless steel.
For MIL-DTL-38999 Series III and IV Connectors.
|
 |
Self-locking. Full radius saddles. Lightweight, corrosion-proof composite saddle clamp fits MIL-DTL-38999 Series III and IV connectors. For use with open bundle wiring harnesses and closed bundle (jacketed) harnesses. Anti-decoupling mechanism provides audible detented coupling and prevents backoff under high vibration. Telescoping screws. Full radius saddles are intended to be bottomed onto frame. High temperature thermoplastic. Straight, 45° and 90° profiles.
For MIL-DTL-38999 Series III and IV Connectors.
|
 |
Shielded. Self-locking. Full radius saddles. Saddle clamp has shielding braid attached to EMI adapter. Fits MIL-DTL-38999 Series III and IV connectors. Anti-decoupling mechanism in coupling nut provides audible detented coupling and prevents backoff under high vibration. Self-locking stainless steel clinch nuts. Aluminum or SST coupling nut and frame, with SST saddles. Straight, 45° and 90° profiles.
For MIL-DTL-38999 Series III and IV Connectors.
|
 |
Shielded. Self-locking. Composite. Saddle clamp has brass EMI adapter attached to 12 inches (30 cm) of shielding braid. Fits MIL-DTL-38999 Series III and IV connectors. Anti-decoupling mechanism in coupling nut provides audible detented coupling and prevents backoff under high vibration. Captive self-locking clinch nuts, full radius saddles. Available with ArmorLite® lightweight microfilament SST braid. Straight, 45° and 90° profiles.
For MIL-DTL-38999 Series III and IV Connectors.
|
 |
Self-locking. Full radius saddles. Extra clearance for #8 sealing boots. Extended frame saddle clamp fits MIL-DTL-38999 Series III and IV connectors. Clamp has enlarged inside diameter and longer frame to provide clearance for size 8 coax/twinax/quadrax/octaxial contacts with sealing boots. Extra clearance helps prevent contact splay and damage. Optional delectric organizer adds extra anti-splay protection. Full radius saddle bars have self-locking SST clinch nuts. Anti-decoupling mechanism provides audible detented coupling and prevents backoff under high vibration.
For MIL-DTL-38999 Series III and IV Connectors.
|
Series 62 Saddle Clamps for Series 80 Mighty Mouse Connectors
 |
Full radius saddles. Lightweight. Low profile. Direct coupling. Saddle clamp fits Series 80 Mighty Mouse connectors. Aluminum or stainless steel.
For Series 80 Mighty Mouse Connectors.
|
 |
Full radius saddles. Straight, 45° or 90°. Spin coupling. Saddle clamp fits Series 80 Mighty Mouse connectors. Aluminum or stainless steel. Full radius saddles should be fully closed onto frame. Apply silicone tape or resilient bushing to wire bundle to build up diameter to fit the saddles.
For Series 80 Mighty Mouse Connectors.
|
 |
Self-locking. Full radius saddles. Open frame saddle clamp fits Series 80 Mighty Mouse connectors. Anti-decoupling mechanism provides audible detented coupling and prevents backoff under high vibration. Die cast saddle bars have self-locking stainless steel clinch nuts. Full radius saddles are intended to be fully closed (bottomed onto frame). Aluminum or stainless steel. Straight, 45° and 90° profiles.
For Series 80 Mighty Mouse Connectors.
|
 |
Self-locking. Full radius saddles. Lightweight, corrosion-proof composite saddle clamp fits Glenair Series 80 Mighty Mouse connectors. For use with open bundle wiring harnesses and closed bundle (jacketed) harnesses. Anti-decoupling mechanism provides audible detented coupling and prevents backoff under high vibration. Self-locking screws. Full radius saddles are intended to be bottomed onto frame. Straight, 45° and 90° profiles.
For Series 80 Mighty Mouse Connectors.
|
 |
Shielded. Self-locking. Full radius saddles. Saddle clamp has shielding braid attached to EMI adapter. Fits Series 80 Mighty Mouse. Brass EMI adapter and crimp ring. Anti-decoupling mechanism in coupling nut provides audible detented coupling and prevents backoff under high vibration. Self-locking clinch nuts. Aluminum or SST. Straight, 45° and 90° profiles.
For Series 80 Mighty Mouse Connectors.
|
 |
Self-locking. Full radius saddles. Extra clearance for #8 sealing boots. Extended frame saddle clamp fits Series 80 Mighty Mouse connectors. Clamp has enlarged inside diameter and longer frame to provide clearance for size 8 coax/twinax/quadrax/octaxial contacts with sealing boots. Extra clearance helps prevent contact splay and damage. Full radius saddle bars have self-locking SST clinch nuts. Anti-decoupling mechanism provides audible detented coupling and prevents backoff under high vibration.
For Series 80 Mighty Mouse Connectors.
|
Series 62 Saddle Clamps for Series 806 Mil/Aero Connectors
 |
Self-locking. Full radius saddles. Open frame saddle clamp fits Series 806 MilAero connectors. Anti-decoupling mechanism provides audible detented coupling and prevents backoff under high vibration. Die cast saddle bars have self-locking stainless steel clinch nuts. Full radius saddles are intended to be fully closed (bottomed onto frame). Aluminum or stainless steel.
For Series 806 Mil/Aero Connectors.
|
 |
Self-locking. Full radius saddles. Lightweight, corrosion-proof composite saddle clamp fits Glenair Series 806 MilAero connectors. For use with open bundle wiring harnesses and closed bundle (jacketed) harnesses. Anti-decoupling mechanism provides audible detented coupling and prevents backoff under high vibration. Telescoping screws. Full radius saddles are intended to be bottomed onto frame. High temperature thermoplastic. Straight, 45° and 90° profiles.
For Series 806 Mil/Aero Connectors.
|
 |
Self-locking. Full radius saddles. Extra clearance for #8 sealing boots. Extended frame saddle clamp fits Series 806 Mil-Aero connectors. Clamp has enlarged inside diameter and longer frame to provide clearance for size 8 coax/twinax/quadrax/octaxial contacts with sealing boots. Extra clearance helps prevent contact splay and damage. Full radius saddle bars have self-locking SST clinch nuts. Anti-decoupling mechanism provides audible detented coupling and prevents backoff under high vibration.
For Series 806 Mil/Aero Connectors.
|
Series 62 Saddle Clamps for Series 970 PowerTrip® Connectors
 |
Spin coupling. Heavy-duty clamp fits Glenair Series 970 PowerTrip® connectors. Anti-decoupling mechanism provides audible detented coupling and prevents backoff under high vibration. Saddles have self-locking stainless steel clinch nuts. Rigid dielectric bushing provides additional wire support (not available for all insert patterns). Aluminum alloy or stainless steel. Stainless steel screws and clinch nuts, thermoplastic wire support bushing.
For Series 970 PowerTrip® Connectors.
|
Series 62 Saddle Clamps for MIL-DTL-28840 Connectors
 |
Aluminum or SST. For jacketed cable. Saddle clamp fits MIL-DTL-28840 and Glenair Series 901 connectors. Stainless steel screws and lock washers. Straight, 45° and 90° profiles.
For MIL-DTL-28840 Connectors.
|
Series 62 Saddle Clamps for MIL-DTL-26500 Connectors
 |
Saddle clamp fits MIL-DTL-26500 Class F, G and R connectors. Aluminum with stainless steel screws. Direct coupling.
For MIL-DTL-26500 Connectors.
|
