EMI Backshell

Series 38

Series 38 EMI backshells protect electrical wiring harnesses from electromagnetic interference. For use with shielded cable. Non-environmental. Heavy duty Type H saddle clamp has telescoping screws and die cast saddles. Two grounding rings provide low resistance termination of braided overall and individual shields.

Reference

Series 38 EMI Backshells: Selection Guide

EMI Backshells on this page for...

AS50151 Crimp, M26482 Series II, M83723 Series III, AS95234
AS50151 Solder Connectors
MIL-DTL-26482 Series I Connectors
MIL-DTL-38999 Series I/II Connectors
MIL-DTL-28840 Connectors
MIL-DTL-38999 Series III/IV Connectors
Series 80 Mighty Mouse Connectors
Series 806 Mil/Aero Connectors
Series 970 PowerTrip® Connectors

Series 38 EMI Backshells for AS50151 Crimp, M26482 Series II, M83723 Series III, AS95234

380A*103
EMI Backshell, Spin Coupling

Shielded. Straight, 45° or 90°.

380A*103 backshell fits AS50151 crimp (MS3450), AS95234, MIL-DTL-26482 Series II, MIL-DTL-83723 Series III connectors. Spin coupling. Cone and ring shield termination. Two ground rings for terminating individual and overall braid shields. Type H heavy duty saddle clamp has stainless steel telescoping fillister head screws and lockwashers. Available in aluminum or stainless steel.

For AS50151 Crimp, M26482 Series II, M83723 Series III, AS95234.

380A*105
EMI Backshell, Self-Locking

Shielded. Self locking.

380A*105 backshell fits AS50151 crimp (MS3450), AS95234, MIL-DTL-26482 Series II, MIL-DTL-83723 Series III connectors. Anti-decoupling mechanism provides audible detented coupling and prevents backoff under high vibration. Non-environmental. Cone and ring shield termination. Two ground rings for terminating individual and overall braid shields. Type H heavy duty saddle clamp has stainless steel telescoping fillister head screws and lockwashers. Available in aluminum or stainless steel.

For AS50151 Crimp, M26482 Series II, M83723 Series III, AS95234.

380A*099
EMI Backshell, Composite, Self-Locking

Shielded. Corrosion proof. Self locking.

380A*099 backshell fits AS50151 crimp (MS3450), AS95234, MIL-DTL-26482 Series II, AS81703 Series 3, MIL-DTL-83723 Series III connectors. Lightweight, corrosion-free composite material. Anti-decoupling mechanism provides audible detented coupling and prevents backoff under high vibration. Non-environmental. Cone and ring shield termination. Glass-reinforced thermoplastic. Stainless steel telescoping screws.

For AS50151 Crimp, M26482 Series II, M83723 Series III, AS81703 Series 3, AS95234

Series 38 EMI Backshells for AS50151 Solder Connectors

380B*002
EMI Backshell, Direct Coupling

Straight, 45° or 90°. Cone and ring braid shield termination. 380B*002 backshell fits AS50151 (MS3100) solder connectors. Direct coupling. For use with shielded cable. Type H heavy duty saddle clamp has stainless steel telescoping fillister head screws and lockwashers. Available in aluminum or stainless steel.

For AS50151 Solder Connectors.

Series 38 EMI Backshells for MIL-DTL-26482 Series I Connectors

380D*002
EMI Backshell, Direct Coupling

Straight, 45° or 90°. Cone and ring shield termination. 380D*002 backshell fits MIL-DTL-26482 Series I connectors. Direct coupling. Non-environmental, for use with shielded cable. Type H heavy duty saddle clamp has stainless steel telescoping fillister head screws and lockwashers. Available in aluminum or stainless steel.

For MIL-DTL-26482 Series I Connectors.

Series 38 EMI Backshells for MIL-DTL-38999 Series I/II Connectors

380F*103
EMI Backshell, Spin Coupling

Shielded. Straight, 45° or 90°. 380F*103 backshell fits MIL-DTL-38999 Series I and II connectors. Spin coupling. Cone and ring shield termination. Two ground rings for terminating individual and overall braid shields. Type H heavy duty saddle clamp has stainless steel telescoping fillister head screws and lockwashers. Available in aluminum or stainless steel.

For MIL-DTL-38999 Series I/II Connectors.

380F*105
EMI Backshell, Spin Coupling, Self-Locking

Shielded. Self locking. 380F*105 backshell fits MIL-DTL-38999 Series I and II connectors. Anti-decoupling mechanism provides audible detented coupling and prevents backoff under high vibration. Non-environmental. Cone and ring shield termination. Two ground rings for terminating individual and overall braid shields. Type H heavy duty saddle clamp has stainless steel telescoping fillister head screws and lockwashers. Available in aluminum or stainless steel.

For MIL-DTL-38999 Series I/II Connectors.

380F*099
EMI Backshell, Composite, Self-Locking

Shielded. Corrosion proof. Self locking. 380F*099 backshell fits MIL-DTL-38999 Series I / II connectors. Lightweight, corrosion-free composite material. Anti-decoupling mechanism provides audible detented coupling and prevents backoff under high vibration. Non-environmental. Cone and ring braid shield termination. Glass-reinforced thermoplastic, telescoping stainless steel clamp screws.

For MIL-DTL-38999 Series I/II Connectors.

Series 38 EMI Backshells for MIL-DTL-28840 Connectors

380G*011
EMI Backshell, Spin Coupling

Shielded. Straight, 45° or 90°. 380G*011- backshell fits MIL-DTL-28840 connectors. Spin coupling. For use with shielded jacketed cable. Type H heavy duty saddle clamp has stainless steel telescoping fillister head screws and lockwashers. Available in aluminum or stainless steel.

For MIL-DTL-28840 Connectors.

Series 38 EMI Backshells for MIL-DTL-38999 Series III/IV Connectors

380H*103
EMI Backshell, Spin Coupling

Shielded. Straight, 45° or 90°. 380H*103 backshell fits MIL-DTL-38999 Series III and IV connectors. Spin coupling. Cone and ring shield termination. Two ground rings for terminating individual and overall braid shields. Type H heavy duty saddle clamp has stainless steel telescoping fillister head screws and lockwashers. Available in aluminum or stainless steel.

For MIL-DTL-38999 Series III/IV Connectors.

380H*105
EMI Backshell, Self-Locking

Shielded. Self locking. 380H*105 backshell fits MIL-DTL-38999 Series III and IV connectors. Anti-decoupling mechanism provides audible detented coupling and prevents backoff under high vibration. Non-environmental. Cone and ring shield termination. Two ground rings for terminating individual and overall braid shields. Type H heavy duty saddle clamp has stainless steel telescoping fillister head screws and lockwashers. Available in aluminum or stainless steel.

For MIL-DTL-38999 Series III/IV Connectors.

380H*099
EMI Backshell, Composite, Self-Locking

Shielded. Corrosion proof. Self locking. 380H*099 backshell fits MIL-DTL-38999 Series III and IV connectors. Lightweight, corrosion-free composite material. Anti-decoupling mechanism provides audible detented coupling and prevents backoff under high vibration. Non-environmental. Cone and ring braid shield termination. Glass-reinforced thermoplastic, telescoping stainless steel clamp screws.

For MIL-DTL-38999 Series III/IV Connectors.

Series 38 EMI Backshells for Series 80 Mighty Mouse Connectors

380MS135
EMI Backshell, Direct Coupling

EMI. Low profile. Direct coupling. Non-environmental. 380MS135 backshell fits Glenair Series 80 Mighty Mouse connectors. For use with shielded cable. Fold cable braid over ground ring. Full radius saddle clamp has stainless steel screws and lockwashers. Available in aluminum or stainless steel.

For Series 80 Mighty Mouse Connectors.

380MS141
EMI Backshell, Spin Coupling, Lightweight, Low Profile

EMI. Low profile. Spin coupling. Non-environmental. Ultralightweight, compact 380MS141 backshell fits Glenair Series 80 Mighty Mouse connectors. For use with shielded cable. Fold cable braid over tapered ground ring for 360° shielding. Cable clamp has stainless steel screws and lockwashers. Available in aluminum or stainless steel.

For Series 80 Mighty Mouse Connectors.

380M*137
EMI Backshell, Spin Coupling

EMI. Low profile. Straight, 45°, and 90°. 380M*137backshell fits Glenair Series 80 Mighty Mouse connectors. For use with shielded cable. Fold cable braid over ground ring for 360° shielding. Cable clamp has stainless steel screws and lockwashers. Available in aluminum or stainless steel.

For Series 80 Mighty Mouse Connectors.

Series 38 EMI Backshells for Series 806 Mil/Aero Connectors

380V*143
EMI Backshell, Self-Locking

EMI shielding. Self-locking. Straight, 45° or 90°. 380V*143 backshells fit Glenair Series 806 connectors. Two ground rings for terminating individual and overall braid shields. Anti-decoupling mechanism provides audible detented coupling and prevents backoff under high vibration. Non-environmental. Type H heavy duty saddle clamp has stainless steel telescoping fillister head screws and lockwashers. Available in aluminum or stainless steel.

For Series 806 Mil/Aero Connectors.

387V*243
EMI Backshell, Composite, Self-Locking

Shielded. Corrosion proof. Self locking. 387V*243 backshell fits Glenair Series 806 connectors. Lightweight, corrosion-free composite material. Anti-decoupling mechanism provides audible detented coupling and prevents backoff under high vibration. Non-environmental. Available with electroless nickel, nickel-PTFE, or olive drab cadmium plating. Glass-reinforced thermoplastic, aluminum ground rings, telescoping stainless steel clamp screws.

For Series 806 Mil/Aero Connectors.

Series 38 EMI Backshells for Series 970 PowerTrip® Connectors

380P*105
EMI Backshell, Self-Locking

Shielded. Straight, 45° or 90°. 380P*105 backshell fits Glenair Series 970 PowerTrip connectors. Spin coupling, non-environmental. For use with shielded cable. Type H heavy duty saddle clamp has stainless steel telescoping fillister head screws and lockwashers. Two ground rings for terminating both individual and overall braid shields. Anti-decoupling mechanism provides audible detented coupling and prevents backoff under high vibration. Available in aluminum or stainless steel.

For Series 970 PowerTrip® Connectors.