EMI+Environmental Backshell

390A*053
EMI+Environmental Backshell, Spin Coupling

390A*053 backshell fits AS50151 crimp (MS3450), AS95234, MIL-DTL-26482 Series II, MIL-DTL-83723 Series III connectors. Spin coupling. Two ground rings for terminating individual and overall braid shields. Type H heavy duty saddle clamp has stainless steel telescoping fillister head screws and lockwashers. Available in aluminum or stainless steel. Silicone O-ring and cable grommet.

For AS50151 Crimp, M26482 Series II, M83723 Series III, AS95234.

390A*055
EMI+Environmental Backshell, Self-Locking

390A*055 backshell fits AS50151 crimp (MS3450), AS95234, MIL-DTL-26482 Series II, MIL-DTL-83723 Series III connectors. Anti-decoupling mechanism provides audible detented coupling and prevents backoff under high vibration. Two ground rings for terminating individual and overall braid shields. Environmentally protected with O-rings and cable grommet. Two strain relief options: saddle clamp or low profile nut. When the strain relief is tightened onto the adapter, the grommet compresses onto cable jacket to create a watertight cable seal. Type H heavy duty saddle clamp has stainless steel telescoping fillister head screws and lockwashers. Available in aluminum or stainless steel. Silicone O-rings and grommet.

For AS50151 Crimp, M26482 Series II, M83723 Series III, AS95234.

390A*052
EMI+Environmental Backshell, Composite, Self-Locking

390A*052 backshell fits AS50151 crimp (MS3450), AS95234, MIL-DTL-26482 Series II, MIL-DTL-83723 Series III connectors. Lightweight, corrosion-free composite material. Anti-decoupling mechanism provides audible detented coupling and prevents backoff under high vibration. Environmental. Cone and ring braid shield termination. Available with electroless nickel, nickel-PTFE, or olive drab cadmium plating. Glass-reinforced thermoplastic, telescoping stainless steel clamp screw.

For AS50151 Crimp, M26482 Series II, M83723 Series III, AS95234.

390B*002
EMI+Environmental Backshell, Direct Couple

Straight, 45° or 90°. Cone and ring shield termination.

380B*002 backshell fits AS50151 (MS3100) solder connectors. Direct coupling. For use with shielded jacketed cable. Type H heavy duty saddle clamp has stainless steel telescoping fillister head screws and lockwashers. Available in aluminum or stainless steel.

For AS50151 Solder Connectors.

390D*002
EMI+Environmental Backshell, Direct Coupling

390D*002 backshell fits MIL-DTL-26482 Series I connectors. Direct coupling, environmentally sealed with O-rings and cable grommet. For use with shielded jacketed cable. Cone and ring shield termination. Two strain relief options: saddle clamp or low profile nut. When the strain relief is tightened onto the adapter, the grommet compresses onto cable jacket to create a watertight seal. Type H heavy duty saddle clamp has stainless steel telescoping fillister head screws and lockwashers. Available in aluminum or stainless steel. Silicone O-ring and grommet.

For MIL-DTL-26482 Series I Connectors.

390F*053
EMI+Environmental Backshell, Spin Coupling

390F*053 backshell fits MIL-DTL-38999 Series I and II connectors. Spin coupling. Two ground rings for terminating individual and overall braid shields. Environmentally protected with O-rings and cable grommet. For use with shielded jacketed cable. Cone and ring shield termination. Two strain relief options: saddle clamp or low profile nut. When the strain relief is tightened onto the adapter, the grommet compresses onto cable jacket to create a watertight seal. Type H heavy duty saddle clamp has stainless steel telescoping fillister head screws and lockwashers. Available in aluminum or stainless steel. Silicone O-rings and grommet.

For MIL-DTL-38999 Ser. I/II Connectors.

390F*055
EMI+Environmental Backshell, Self-Locking

390F*055 backshell fits MIL-DTL-38999 Series I and II connectors. Anti-decoupling mechanism provides audible detented coupling and prevents backoff under high vibration. Two ground rings for terminating individual and overall braid shields. Environmentally protected with O-rings and cable grommet. Two strain relief options: saddle clamp or low profile nut. When the strain relief is tightened onto the adapter, the grommet compresses onto cable jacket to create a watertight cable seal. Type H heavy duty saddle clamp has stainless steel telescoping fillister head screws and lockwashers. Available in aluminum or stainless steel. Silicone O-rings and grommet.

For MIL-DTL-38999 Ser. I/II Connectors.

390F*052
EMI+Environmental Backshell, Composite, Self-Locking

390F*052 backshell fits MIL-DTL-38999 Series I/II connectors. Lightweight, corrosion-free composite material. Anti-decoupling mechanism provides audible detented coupling and prevents backoff under high vibration. Environmental. Cone and ring shield termination. Available with electroless nickel, nickel-PTFE, or olive drab cadmium plating. Glass-reinforced thermoplastic, telescoping stainless steel clamp screws.

For MIL-DTL-38999 Ser. I/II Connectors.

390H*053
EMI+Environmental Backshell, Spin Coupling

390H*053 backshell fits MIL-DTL-38999 Series III and IV connectors. Two ground rings for terminating individual and overall braid shields. Environmentally protected with O-rings and cable grommet. For use with shielded jacketed cable. Cone and ring shield termination. Two strain relief options: saddle clamp or low profile nut. When the strain relief is tightened onto the adapter, the grommet compresses onto cable jacket to create a watertight seal. Type H heavy duty saddle clamp has stainless steel telescoping fillister head screws and lockwashers. Available in aluminum or stainless steel. Silicone O-rings and grommet.

For MIL-DTL-38999 Ser. III/IV Connectors.

390H*055
EMI+Environmental Backshell, Self-Locking

390H*055 backshell fits MIL-DTL-38999 Series III and IV connectors. Anti-decoupling mechanism provides audible detented coupling and prevents backoff under high vibration. Two ground rings for terminating individual and overall braid shields. Environmentally protected with O-rings and cable grommet. Two strain relief options: saddle clamp or low profile nut. When the strain relief is tightened onto the adapter, the grommet compresses onto cable jacket to create a watertight seal. Type H heavy duty saddle clamp has stainless steel telescoping fillister head screws and lockwashers. Available in aluminum or stainless steel. Silicone O-rings and grommet.

For MIL-DTL-38999 Ser. III/IV Connectors.

390H*052
EMI+Environmental Backshell, Composite, Self-Locking

390H*052 backshell fits MIL-DTL-38999 Series III/IV connectors. Lightweight, corrosion-free composite material. Anti-decoupling mechanism provides audible detented coupling and prevents backoff under high vibration. Environmental. Cone and ring shield termination. Available with electroless nickel, nickel-PTFE, or olive drab cadmium plating. Glass-reinforced thermoplastic, telescoping stainless steel clamp screws .

For MIL-DTL-38999 Ser. III/IV Connectors.

390G*0131
EMI+Environmental Backshell

390G*013 backshell fits MIL-DTL-28840 connectors. Spin coupling. Environmentally protected with O-rings and cable grommet. For use with shielded jacketed cable. Cone and ring shield termination. Two strain relief options: saddle clamp or low profile nut. When the strain relief is tightened onto the adapter, the grommet compresses onto cable jacket to create a watertight seal. Type H heavy duty saddle clamp has stainless steel telescoping fillister head screws and lockwashers. Available in aluminum or stainless steel. Silicone O-rings and grommet.

For MIL-DTL-28840 Connectors.

390MS076
EMI+Environmental Backshell, Direct Coupling

390MS076 backshell fits Glenair Series 80 Mighty Mouse connectors. Terminate cable braid with ground ring. Strain relief options include saddle clamp or nut. Full radius saddle clamp has stainless steel screws and lockwashers. Available in aluminum or stainless steel.

For Series 80 Mighty Mouse Connectors.

390M*077
EMI+Environmental Backshell, Spin Coupling

390M*077 backshell fits Glenair Series 80 Mighty Mouse connectors. O-rings provide watertight cable and connector sealing. Terminate cable shield braid with ground ring. Cable clamp has stainless steel screws and lockwashers. Available in aluminum or stainless steel. Silicone O-rings.

For Series 80 Mighty Mouse Connectors.

390V*091
EMI+Environmental Backshell, Self-Locking

Compatible with Glenair's Series 806 connectors with metric accessory thread. Anti-decoupling mechanism provides audible detented coupling and prevents backoff under high vibration. Two ground rings for terminating individual and overall braid shields. Environmentally protected with O-rings and cable grommet. Two strain relief options: saddle clamp or low profile nut. When the strain relief is tightened onto the adapter, the grommet compresses onto cable jacket to create a watertight cable seal. Type H heavy duty saddle clamp has stainless steel telescoping fillister head screws and lockwashers. Available in aluminum or stainless steel. Silicone O-rings and grommet.

For Series 806 Mil/Aero Connectors.

390P*055
EMI+Environmental Backshell, Self-Locking

Compatible with Glenair's Series 970 PowerTrip connectors. Anti-decoupling mechanism provides audible detented coupling and prevents backoff under high vibration. Environmentally protected with O-ring and cable grommet. Three strain relief options: saddle clamp,nut, or wire mesh cordgrip. Type H heavy duty saddle clamp has stainless steel telescoping fillister head screws and lockwashers. Available in aluminum or stainless steel. Silicone O-ring and grommet.

For Series 970 PowerTrip® Connectors.