ITH Series

Easy-to-Assembly, Rigid Insert Power and Signal Reliable Reverse Bayonet Coupling Connectors

NFF 61030 Qualified Connectors

The Glenair Commital ITH connector series is based on the MIL-C-5015 standard, but features an improved reverse bayonet coupling technology in place of the threaded coupling used in MIL-C-5015. The ITH Series is also notable for its rigid inserts and crimp contacts that provide both better electrical insulation as well as reduced assembly time. The connector also features a 3-point reverse bayonet coupling mechanism which provides easier mating when the connector is in an awkward position. Positive locking of the three stainless steel pins provides reliable resistance to vibration and shock, and prevents connector de-coupling in even the most rugged applications such as locomotives and mass-transit cars. The products conform to the VG95234 standard and are currently used throughout Europe on hundreds of ruggedized applications. All connectors in the series conform to French (NFF 61030) electrical standards, as well as EEC compliance directives for electromagnetical compatibility. EMI shield termination accessories are available for both overall as well as individual wire shields.

Reference

• Introduction: ITH Series
• Rated Current
• Contact Arrangements, Polarizations, and Insert Rotations
• Panel Cutout and Thickness Requirements
• How to Order

Exploded View

• Wall Mounted Receptacle and Straight Plug

Dimensional Details

• Pin Contacts
• Socket Contacts

Connector Products and Part Numbers

• Table of Contents

High Voltage Electrical Power Distribution

• From 0 to 60 in 3.9 Seconds

	ITH 03FF A and ITH 03FP A ITH 03FF R and ITH 03FP R Box Mount Receptacle Connector for Rear Panel Mounting
	ITH 030 A and ITH 030 R Rear Box Mount Receptacle with Accessory Backshell and a Selection of Cable Clamps
	ITH 030 (EMI) and ITHC 030 (EMI) Rear Box Mount Receptacle with Backshell for EMI Shielded and Jacketed Cable
	ITH 030 A (M) Rear Panel Box Mount Receptacle with Metric Thread Cable Gland Backshell
	ITH 06 A N0 ITH 06 R N0 Straight Plug Assembly
	ITH 06 A and ITH 06 R Sraight Plug with Accessory Backshell and a Selection of Cable Clamps
	ITH 06 A (EMI) Straight Plug Connector with Backshell for EMI Shielded and Jacketed Cable
	ITH 06 A (M) Straight Plug Connector with Metric Thread Cable Gland Backshell
	ITH 08 A and ITH 08 R 90° Plug Connector with Accessory Backshell and a Selection of Cable Clamps
	PL 37267-XX Type A Adapter
	PL 37267-XXM Metric Adapter
	IT 37267-BRXXX BR Adapter for Termination of UNI4883 Rubber Conduit
	ITB 06T-XX Plug Connector Cap with Stainless Steel Chain
	ITB 02T-XX Receptacle Connector Cap with Stainless Steel Chain
	IT 3057-A Cable Clamp
	IT 3057-XXC General Duty Cable Clamp for Jacketed or Multipolar Cable or Wires Protected by Tubing
	IT 3420-XX (Class A) Neoprene Sleeve for Protection & Reduction Used with Class A Cable Clamps
	IT 3420-XXA (Class C) Neoprene Sleeve for Protection & Reduction Used with Class C Cable Clamps
	IT 40450-XX and IT 40450-XXS Connector Mounting Gaskets for Front-Mounted Square Flange Receptacle
	IT 40460-XX and IT 40460-XXS Connector Mounting Gaskets for Rear-Mounted Square Flange Receptacle
	Crimping Tools For Termination of ITH Connectors
	Insertion and Removal Tools For Assembly of ITH Connectors