
G-Spring EMI/RFI Backshell Provides 360° Grounding Without Damaging Shielding
Ideal for applications in which the make-up of the shield does not easily permit forming over a ground ring, banding platform or other terminating device
Glenair's "G-Spring" backshells provide an innovative method of terminating and grounding overall shields, screens and metal foil shielding on wiring harnesses and cables. The G-Spring design provides a peripheral spring member which compresses against the exposed shield to effect positive electrical grounding around the entire circumference of the shield. This design is particularly well suited for applications where disturbance or distortion of the shield is undesirable, or the makeup of the shield does not easily permit forming over a grounding ring or other termination device. It is available in both non-environmental and cable jacket sealing versions. An inner support ring inserted under the shield or screen prevents damage to the wire conductor insulation at the point where the G-Spring makes contact with the shield.
Reference
![]() |
469-001For use with Series 460 and 463 G-Spring Backshells |
![]() |
460-001EMI/RFI Non-Environmental G-Spring Backshell with Strain ReliefRotatable Coupling - Low Profile |
![]() |
460-002EMI/RFI Non-Environmental G-Spring Backshell with Strain ReliefDirect Coupling - Low Profile and Split 90° |
![]() |
460-003EMI/RFI Non-Environmental G-Spring Backshell with Strain ReliefRotatable Coupling - Standard Profile |
![]() |
460-011EMI/RFI Non-Environmental G-Spring Backshell with Strain ReliefSelf-Locking Rotatable Coupling - Standard Profile |