Banding, Crimping and Tinel-Lock® EMI/RFI Shield Termination Backshells

Series 440

Fast, Efficient and Economical: Banding, Crimp Ring and Tinel-Lock® Ring Shield Terminations

360° shield termination and low DC resistance

Banding and crimp ring backshells provide an economical approach to terminating overall cable and harness shields/screens. These backshells utilize replacable bands for full 360° shield/screen termination with low DC resistance available. For information on Glenair’s Band-It® Clamping System, please see our Backshell Assembly Tools, Banding Tools and Accessories catalog. Crimp ring backshells provide an economical approach to terminating overall cable and harness shields where future repairability or maintainability are not required. These backshells use standard outer crimp rings for full 360° shield termination, and are available in versions for use with shrink boots or for molded cable terminations.

Tinel-Lock® Ring Termination Systems feature unique heat-recoverable rings for high performance termination of electrical and mechanical braid providing 360° shield/screen termination and low dc resistance. Each kit includes the backshell and ring and (optionally) a heat-recoverable boot for environmental protection and strain-relief. The Tinel-Lock® Ring Termination System creates a repairable, environmentally sealed, EMI resistant interface with up to 70 dB of isolation when an adhesive shrink boot is employed. Backshell configurations include straight, 45° and 90° designs. Ideally suited for high temperature and high stress applications, the Tinel-Lock® Ring Termination System provides optimal protection against mechanical damage of shield terminations and the backshell to connector interface.

Circular Connector Backshells and Accessories > Series 440

440-063

440-063

EMI/RFI Crimp Ring Adapter
Rotatable Coupling
440-001

440-001

EMI/RFI Crimp Ring Adapter
Direct Coupling
440-030

440-030

EMI/RFI Banding and Shrink Boot Adapter
Rotatable Coupling
440-031

440-031

EMI/RFI Banding and Shrink Boot Adapter
Direct Coupling
440-069

440-069

EMI/RFI Banding and Shrink Boot Adapter
Self-Locking Rotatable Coupling
440-070

440-070

EMI/RFI Dual Banding Adapter
Rotatable Coupling
440-071

440-071

EMI/RFI Dual Banding Adapter
Direct Coupling
440-072

440-072

EMI/RFI Dual Banding Adapter
Self-Locking Rotatable Coupling
440-073

440-073

EMI/RFI Banding Adapter
Rotatable Coupling
440-074

440-074

EMI/RFI Banding Adapter
Direct Coupling
440-075

440-075

EMI/RFI Banding Adapter
Self-Locking Rotatable Coupling
440-084

440-084

EMI/RFI Tinel-Lock® Ring Adapter
Rotatable Coupling
440-085

440-085

EMI/RFI Tinel-Lock® Ring Adapter
Direct Coupling - Standard Profile
440-086

440-086

EMI/RFI Tinel-Lock® Ring Adapter
Self-Locking Rotatable Coupling

Tinel-Lock® is a registered trademark of Tyco