MIL-DTL-5015 Connectors, Circular
MS3400 (Front Release Contact) and
MS3450 (Rear Release Contact) Series
Crimp Type Contacts; Glenair Designator Code A

Design Features:
  • Threaded coupling design, captive.
  • Fifteen shell sizes--Range 8 thru 48 (.50 to 3.00 diameter).
  • Wide variety of contact sizes, standard density; 1 to 100 contacts.
  • Conductive finish--Cadmium/olive drab, 500 hour salt life, and electroless-nickel options.
  • Stainless steel class available for severe environments.
  • Controlled accessory interface per MS3155.
  • Cork and bottle interface seal and shell environmental seal, fuel resistant fluorosilicone elastomers.
Notes:
  1. Same interface features as MS3100 and MS3106; intermateable.
  2. Rugged construction to meet severe shipboard applications.
  3. Connector shell may strike pin contacts, thus power should always be on socket contacts.
  4. Single keying may not always insure shell polarizing.
  5. Accessory thread size and geometry is not intermateable with MIL-DTL-5015, 3100 series solder type connector accessory.

Back to Connector Accessory