MIL-C-26482 Connectors, Circular
MS3120 and MS3126
MIL-C-26482 Series 1, Crimp Type Contacts
Front Release; Glenair Designator Code D

Design Features:
  • Bayonet coupling design, quick disconnect.
  • Eight shell sizes--Range 8 thru 24 (.500 to 1.500 diameter).
  • 12, 16, 20, and 22 gage contacts, standard density, 3 to 61 contacts.
  • Conductive and non-conductive finishes; cadmium or anodic.
Notes:
  1. Contacts may mate prior to connector shell mating on products not supplied with grounding fingers.
  2. Same limitations as MS3110 and MS3116 solder type connectors.
  3. Uncontrolled wire seal grommet geometry; accessory must be designed to mate properly.
  4. Accessory thread size and geometry is not intermateable with MIL-C-26482, series 2 crimp type connector accessory.

Back to Connector Accessory