MIL-C-26482 Connectors, Circular
MS3110 and MS3116 Series
MIL-C-26482 Series 1, Solder Type Contacts
Glenair Designator Code D

Design Features:
  • Bayonet coupling design, quick disconnect.
  • Ten shell sizes--Range 6 thru 24 (.375 to 1.500 diameter).
  • 12, 16, and 20 gage contacts, standard density, 3 to 61 contacts.
  • Conductive and non-conductive finishes; cadmium/olive drab and anodic.
Notes:
  1. Contacts may mate prior to connector shell mating.
  2. Plug may have very short thread length, less than three threads. Threads may have modified major diameter. Result is marginal performance with accessories.
  3. Accessory thread size and geometry is not intermateable with MIL-C-26482, series 2 crimp type connector accessory.

Back to Connector Accessory