MIL-DTL-5015 Connectors, Circular,
MS3100 Series, Solder Types;
Glenair Designator Code B

Design Features:
  • Threaded coupling design.
  • Fifteen shell sizes--Range 8 thru 48 (.50 to 3.00 diameter).
  • Wide variety of contact sizes, standard density; 1 to 100 contacts.
  • Conductive finish--Cadmium/olive drab, 96 hour corrosion protection.

Notes:
  1. Contacts may mate prior to connector shell mating.
  2. Plug or receptacle may have pin or socket contacts.
  3. Connector shell may strike pin contacts, thus power should always be on socket contacts.
  4. Single Keying may not always insure shell polarizing.
  5. Uncontrolled accessory interface.
  6. Accessory thread size and geometry is not intermateable with MIL-DTL-5015, series 3400 crimp type connector accessory.

Back to Connector Accessory