MIL-C-38999 Connectors, Series 1
Crimp Contacts
Rear Release; Glenair Code F

Design Features:
  • Bayonet coupling design, quick disconnect.
  • Eight shell sizes--Range 9 thru 25 (.500 to 1.500 diameter).
  • 12, 16, 20, and 22 gage contacts, standard density and 22 gage high density arrangements; 3 to 128 contacts.
  • Scoop-proof shell design to prevent shell to contact problem.
  • Controlled accessory interface per MIL-C-38999, figure 11.
  • Cork and bottle primary insert interface seal and shell environmental seal, fuel resistant silicone elastomers.
  • Conductive and non-conductive finishes; electroless nickel, cadmium/olive drab 500 hour salt life, and anodic.
Notes:
  1. Long barrel design to prevent shell striking contacts.
  2. Serrated accessory interlocking tooth design may prevent reliable moisture seal or EMI bond to accessories.
  3. Bayonet coupling may not perform under severe conditions with large diameter cable and backshell.

Back to Connector Accessory