|
Adapters And Transitions When optimum shielding effectiveness and transfer impedance is a requirement, we recommend Glenair pre-assembled adapters and transitions. Common adapters and transitions are shown in this section. For configurations not shown, consult the factory. Glenair offers hundreds of fitting design options not presented in this catalog. Consult the factory for other specific end fittings or adapters you may require. Unless otherwise specified, the following dimensional tolerances will apply: .xx = ± .03 (0.8) .xxx = ± .015 (0.4) Metric dimensions (mm) are in parentheses. |
| Product Selection Guide | |
 |
710-100
Series 72, 74, and 75 Bulkhead Adapters |
 |
710-112
Series 72, 74, and 75 Split Backshell |
 |
710-118
Series 72, 74, and 75 "Y" Split Transitions |
|
710-120
Series 72, 74, and 75 "T" Split Transitions |
 |
710-114, 710-115, 710-405
Male Series 75 Tapered Pipe Thread Adapters |
|
710-116, 710-117, 710-406
Female Series 75 Tapered Pipe Thread Adapters |
 |
710-106, 710-107, 710-370
Series 72, 74 & 75 Metal Split 'Y' Transitions |
|
710-108, 710-109, 710-371
Series 72, 74 & 75 Metal Split 'T' Transitions |
 |
710-077
Series 72, 74 & 75 Transitions |
 |
710-093
Series 72, 74 & 75 Transitions |
 |
710-493
Series 72, 74 & 75 Transitions |
 |
710-444
Series 72, 74 & 75 Transitions |
 |
713-100
Series 72, 74, and 75 Adapters, Enviromental |
 |
713-102
Series 72, 74, and 75 Adapters |
 |
710-652
Series 72 & 74 Tubing and Series 75 Conduit |
 |
710-318
Series 72 & 74 Convoluted Tubing |
 |
710-319
Series 72 & 74 Convoluted Tubing |
 |
710-320
Series 72 & 74 Convoluted Tubing |
 |
710-321
Series 72 & 74 Convoluted Tubing |